casaholic.blogg.se - How to format sd card on trail camera

After 30 seconds you will see the LEVEL lights come on the modem.

You will see the AWAKE light come on right away.Press and release the TEST button on the side of the modem.Insert the modem's battery tray into the modem.Connect the camera and modem together with the supplied USB cable.Reference your camera's manual for instructions. Format your SD Card with the DELETE or ERASE ALL IMAGES function.Turn your camera to ON or CUSTOM START.Each time a picture is taken, the battery light quickly flashes green and the cycle begins again.įormat Your SD Card to Connect and Transmit Photos ( Trail Camera w/ Field Modem).Your camera is now ready to take a photo.Once fully connected, all four lights will turn green briefly and then cycle off.Allow roughly 60 seconds for the connection sequence to complete.If successful the connection sequence will begin with all four lights coming on.If the SD card light turns solid red, repeat the process or try a different SD card.The SD card light turns solid green once formatted successfully.Press and hold the Format SD button until the SD card light blinks yellow.Insert the SD Card and turn your camera ON.First, ensure your SD Card is not locked ( the toggle on the side of the card).

In the event you did not receive a hi-res picture or video that you requested, you will need to change out the SD Card so you can view those items on your computer, laptop or tablet. Please Note: Formatting your SD Card will erase any pictures or videos that are stored on it.

Larger than 32GB ( 60 series cameras require less than 32GB)įormat Your SD Card to Connect and Transmit Photos ( Integrated Cameras)Īfter successfully formatting your new and/or recommended SD card, your camera should connect and transmit photos.

32GB ( not for use in 6000 or 7000 series cameras).

Pro Tip: If you are not receiving requested Hi-Res pictures, continue to follow the steps below. It is important to use a Moultrie Mobile recommended SD card for your best viewing experience. If it has been more than 24 hours since your camera connected to the server it will need to be restarted, and your SD Card formatted, or replaced in the event it has become corrupted. It communicates with Moultrie Mobile every day when your camera is turned on and has sufficient battery life and signal.